Steam generator
发布日期：2019-03-29 15:01:28 访问次数：73
We specialize in producing ZFQ and ZF steam generators that are compatible with organic carrier heating furnaces. We can also design and manufacture them according to user needs. The product design adopts the principle of kettle heating and evaporation, and can produce steam continuously or intermittently according to actual working conditions, rather than direct flame heating equipment. This steam generator is safe, reliable, saves investment, energy, and operating costs, has a compact structure, is easy to install and maintain, simple to operate, and easy to use. There are two structural forms: vertical and horizontal. The manufacture of the product complies with the relevant provisions of the "Safety Technical Supervision Regulations" for pressure vessels.A steam generator is a mechanical device that uses the heat energy of fuel or other energy sources to heat water into hot water or steam. The original meaning of a pot refers to a water container heated on fire, and a furnace refers to a place where fuel is burned. A boiler consists of two parts: a pot and a furnace. The hot water or steam generated in a boiler can directly provide the required heat energy for industrial production and people's lives, or it can be converted into mechanical energy through a steam power device, or the mechanical energy can be converted into electrical energy through a generator. A boiler that provides hot water is called a hot water boiler, which is mainly used for life and has a small number of applications in industrial production. A boiler that generates steam is called a steam boiler, often referred to as a boiler, and is mostly used in thermal power plants, ships, locomotives, and industrial and mining enterprises. This steam generator consists of two parts: a hot oil part and a steam generator. The hot oil part is a high-temperature heat transfer oil that enters the tube bundle of the steam generator through a hot oil pump or directly from a heat carrier heating furnace. The heat in the tube transfers the heat to the boiler water outside the tube through the tube wall at a certain flow rate and temperature, heating the water, and the heat transfer oil is cooled and returned to the heating furnace for recycling. The steam generator uses softened water, and the evaporation rate can be increased if it can be preheated.Water enters the evaporator from the bottom, and the water is heated by natural convection to generate steam on the heating surface. It becomes unsaturated steam through the underwater orifice plate and the steam equalization orifice plate, and is sent to the steam drum to provide gas for production and life. A thermal oil boiler can generate high temperature and steam to meet the needs of some fields that require direct steam. The models range from 0.1 tons to 6 tons per hour. In order to better adapt to the current market and meet the needs of various companies to overcome the global energy crisis, our factory produces a new generation of safe, environmentally friendly and energy-saving steam generators SS, which can reduce production costs. It uses the oil temperature of the thermal oil boiler to generate steam, which also replaces the steam boiler.Comparison between steam generator and steam boiler Thermal efficiency of steam boiler: For example, the steam generated by a 10 ton/h steam boiler is 10t/h-20%=8t/h The steam generated by a 10t/h steam generator is 10t/h+10%=11t/h The temperature difference between the inlet and outlet oil temperatures of the steam generator is 15 degrees for vertical and 7 degrees for horizontal. Reasonable design If the temperature required by the setting machine is 230 degrees, then the inlet oil temperature of the steam generator rises to 237 degrees, and the return oil can enter the setting machine at 230 degrees, and then return to the thermal oil boiler. It can also be set according to the needs of the equipment. If, the setting machine needs 230 degrees, then the inlet oil temperature of the steam generator rises to 237 degrees, and the return oil can enter the setting machine at 230 degrees, and then return to the thermal oil boiler. It can also be set according to the needs of the equipment.
中文